D542SB

0
No votes yet, be the first to post your feedback
Icon for replaceble bearings
Icon for sealed bearings
Icon for ABG
Icon for 4in1
Icon for XS
Discontinued stamp
Hub picture of D542SB
367 GRAMS

ALLOY J-HOOK DISC HUB
SHIMANO 9.10.11S / SRAM XD DRIVER

SEALED BEARINGS: 

4PCS

HUB SHELL BEARINGS: 

1 PCS OF #6902 + 1 PCS OF #6809

HUB SPOKE HOLES: 

28 32 36

HUB GAUGE: 

14

HUB O.L.D.: 

135MM

AXLE SIZE: 

QR/10/12x135MM; 12x142MM;

AXLE MATERIAL: 

ALLOY

HUB P.C.D.: 

62 / 70MM

HUB F.T.F.: 

58.10MM

HUB OFFSET: 

6.90MM

HUB PAWLS: 

6

CASSETTE BODY MATERIAL: 

ALLOY

Convertibility: 

This hub supports MULTI-AXLE SYSTEM so you can convert it into different axle size.

For more details about hub convertibility please click here.

 

Tools:  In case you want to maintain your hub then you might need some tools to do so (except for a few tool-less hub models). It depends of course on how deep your disassembling goes, but these are the most important tools to be ready at your hand:

  • 1pc of 5mm Allen Key and 1pc of 17mm Wrench Key (for standard QR hub version), otherwise  2pcs of 17mm Wrench Key (for other axle sizes)

You might also need a hub bearing puller and/or installation tool kit in case you want to change the bearings in your hub (it vary from case to case, not all hubs need it as a hammer will do the job sometime).

Anyway, if you want to see how to use the mentioned hub bearing tools, please click here.

DRAWING OF HUB: 

D542SB-X12

Spoke length calculation

If interested in spoke length calculation, please click here.

Spare parts

Cassette body

CASSETTE BODY SRAM XD, XS COMPATIBILITY TYPE, 3x2 PAWLS, FOR 42 TEETH RATCHET RING, ALLOY MATERIAL, FOR SYNERGY CANTILEVER HUBS.
Cassette body

CASSETTE BODY SHIMANO 9S, XS COMPATIBILITY TYPE, 3x2 PAWLS, FOR 42 TEETH RATCHET RING, ALLOY MATERIAL, FOR SYNERGY CANTILEVER HUBS.
Conversion set

AXLE - QR, ALLOY, 15/10 x 145 MM, WITH SIDE CAP, FOR D882SB, D992SB, D542SB, MULTI-AXLE SYSTEM.
Conversion set

AXLE - 10, ALLOY, 15/10 x 135 MM, WITH SIDE CAP, FOR D882SB, D992SB, D542SB, MULTI-AXLE SYSTEM.
Conversion set

AXLE - 12, ALLOY, 15/12 x 135 MM, WITH SIDE CAP, FOR D882SB, D992SB, D542SB, MULTI-AXLE SYSTEM.
Conversion set

AXLE - X12, ALLOY, 15/12 x 142 MM, WITH SIDE CAP, FOR D882SB, D992SB, D542SB, MULTI-AXLE SYSTEM.
Bearing

SEALED BEARING #6902, SIZE: 15 x 28 x 7 MM, WEIGHT: 15.7 G.
Bearing

SEALED BEARING #6809, SIZE: 45 x 58 x 7 MM, WEIGHT: 40.9 G.
Ratchet ring RATCHET RINGS, 42 TEETH, PRESS-IN AND THREADED TYPE, MATERIAL: STEEL, FOR HUB XD642SB USED ON NOVATEC MTB WHEELS (X4 SYSTEM) AND FOR HUB D542SB, DH42SB (XS SYSTEM - SYNERGY CANTILEVER). THREADED TYPE WAS DISCONTINUED THREFORE RECENT HUBS ARE USING ONLY PRESS-IN TYPE OF RATCHET RING. SPECIAL TOOL IS NEEDED TO REMOVE / INSTALL RATCHET RINGS.