XD612SB-11S

CAMPY MODEL NAME:

XD712SB FOR CAMPY 11S

CENTRE LOCK VERSION:

XD612SB-CL-11S

No votes yet, be the first to post your feedback

275 GRAMS

ALLOY DISC J-HOOK HUB
SHIMANO 9.10.11S SRAM 9.10.11S

SEALED BEARINGS:

4PCS

HUB SHELL BEARINGS:

2 PCS OF #6902

HUB SPOKE HOLES:

24 28

HUB GAUGE:

HUB O.L.D.:

135MM

AXLE SIZE:

QR/12x135MM; 12x142MM; 10x135x145MM

AXLE MATERIAL:

ALLOY

HUB P.C.D.:

58MM

HUB F.T.F.:

56.40MM

HUB OFFSET:

6.80MM

HUB PAWLS:

CASSETTE BODY MATERIAL:

ALLOY

Convertibility:

This hub supports MULTI-AXLE SYSTEM so you can convert it into different axle size.

For more details about hub convertibility please click here.

Tools: In case you want to maintain your hub then you might need some tools to do so (except for a few tool-less hub models). It depends of course on how deep your disassembling goes, but these are the most important tools to be ready at your hand:

1pc of 5mm Allen Key and 1pc of 17mm Wrench Key (for standard QR hub version), otherwise 2pcs of 17mm Wrench Key (for other axle sizes)

You might also need a hub bearing puller and/or installation tool kit in case you want to change the bearings in your hub (it vary from case to case, not all hubs need it as a hammer will do the job sometime).

Anyway, if you want to see how to use the mentioned hub bearing tools, please click here.

DRAWING OF HUB:

XD612SB-S11-QR

Spoke length calculation

If interested in spoke length calculation, please click here.

Spare parts

	CASSETTE BODY SHIMANO 11S, B2 COMPATIBILITY TYPE, 4 PAWLS, ANTI BITE GUARD FEATURE (A.B.G.), ALLOY MATERIAL, FOR 15 MM AXLE.
	CASSETTE BODY SRAM XD 11, B2 COMPATIBILITY TYPE, 4 PAWLS, ALLOY MATERIAL, FOR 15 MM AXLE, WITH SEAL AND NEW SPACER . THIS NEW SPACER IS COMPATIBLE ONLY WITH 4 PAWLS CASSETTE BODIES.

	AXLE - QR, ALLOY, 15/10 x 145 MM, WITH SIDE CAP, FOR D792SB, D772SB, XD612SB, MULTI-AXLE SYSTEM.
	AXLE - 10, ALLOY, 15/10 x 135 MM, WITH SIDE CAP, FOR D792SB, D772SB, XD612SB, MULTI-AXLE SYSTEM.
	AXLE - 12, ALLOY, 15/12 x 135 MM, WITH SIDE CAP, FOR D792SB, D772SB, XD612SB, MULTI-AXLE SYSTEM.
	AXLE - X12, ALLOY, 15/12 x 142 MM, WITH SIDE CAP, FOR D792SB, D772SB, XD612SB, MULTI-AXLE SYSTEM.

SEALED BEARING #6902, SIZE: 15 x 28 x 7 MM, WEIGHT: 15.7 G.

RATCHET RINGS, 27 TEETH, PRESS-IN AND THREADED TYPE, MATERIAL: STEEL, FOR ROAD AND MTB HUBS. THREADED TYPE WAS DISCONTINUED THREFORE RECENT HUBS ARE USING ONLY PRESS-IN TYPE OF RATCHET RING. SPECIAL TOOL IS NEEDED TO REMOVE / INSTALL RATCHET RINGS.

	OIL SEAL FOR B2/D2 TYPE OF CASSETTE BODY COMPATIBILITY, SIZE: 29,8 MM / 17,3 MM, THICKNESS: 3 MM, WEIGHT: 1,9 G.
	4 PAWLS + SPRING FOR CASSETTE BODIES WITH 4 PAWLS (SHIMANO AND SRAM XD), MATERIAL: STEEL.
	WATER SEAL FOR ALL TYPES OF CASSETTE BODIES, SIZE: 26.2 MM / 31.25 MM, THICKNESS: 3 MM. PLACED BETWEEN HUB SHELL AND CASSETTE BODY.